TENDO DTR2
Data collection oriented Tendo station
This Tendo station is part of our environmental ecosystem. The 19″ receiver is optimized for processing and visualisation applications. It has raid coupled NVMe drives for performance database access and a powerfull CPU and GPU. A stable power supply in combination with a well engineered sustainable airflow guarantee troublefree continuous operation under heavy loads.
FEATURES
Runs Tendo
- Tendo comes preinstalled
- Hardware Optimized for Tendo
- Built-in license dongle
plug into the MGB ecosystem
- Fully supports DataExchange
- Pushes measurements to cloud based storage
- Transparent end user experience
Integrated UHF radio
- Can receive data directly from our TARI and SMART buoys
- Easy programming
- 440 – 480 MHz
Timeslotted data transmission
- TENDO DTR2 supports timeslotted UHF transmission
- Easy and flexible configuration
- Optimize UHF bandwidth for TENDO DTR, TARI and SMART buoys
Performance storage
SSD sata storage for OS and database
19" from factor
- Short casing
- 1U high
- Fits standard 19″ racks – 483 mm wide
Thermally validated
- Tested under continouos load
- In house climate chamber
- Optimized airflow
SPECIFICATIONS
TENDO :
- License dongle installed inside
- DataExchange ready
Computer :
- Intel Pentium G4560
- 16GB RAM
- 500GB SSD storage for OS and software
UHF modem :
- 440-480 MHz
- Max power 1W
Environmental :
- Operational temperature 0°C +45°C
- IP20
Connectors :
- 2 x RJ45 (10/100/1000 Mbps ETHERNET)
- 1 x VGA (1920 x 1200 @ 60Hz)
- 1 x DVI-D (1920 x 1200 @ 60 Hz)
- 1 x Display port (4096 x 2160 @ 60Hz)
- 4 x USB 2.0
- 4 x USB 3.0
- 2 x DSUB 9P (SERIAL PORT)
- 1 X TNC-FEMALE (UHF CONNECTOR)
- 1 X C14 (POWER)
Power supply :
- Input voltage 90-264 VAC
- Input frequency 47 – 63 Hz
- Max current 3A@115V input
Mechanical :
- 482.6mm x 243mm x 43.6mm
- 2900 gram