TARI SFC1
Seafloor controller with inductive communication
This controller is part of our environmental ecosystem. It is the hearth of our seafloor measurement solution. Together with our battery pack and mechanical frame it is an out off the box solution for on-line tide, ADCP and multiparameter measurements at the seafloor. The system has been designed with custumizability in mind, so other specific measurements and sensors can be implemented to fit your project.
FEATURES
SENSORS
- ADCP
- Multiparameter probe
- Pressure sensor for tide
SEAFLOOR COMMUNICATION
- Integrated inductive modem technology
- Real-time data telemetry
- Communicates with Buoy module
TIDE CALCULATION
- Integrated 4 bar absolute pressure sensor
- Enables tidal measurement buoys
- Requires TARI BUOY module
- Requires buoy mounted atmospheric pressure sensor
SD-CARD storage
- 4GB capacity
- All measurements are stored
- µSD-card with wear leveling
SUBSEA CONNECTORS
- SubConn® Micro Circular series
- Connections to battery pack and sensors
MEMORY DISPLAY
- 400 x 240 low power memory display
- visible without opening the housing
- Basic status overview of the controller
NON CORROSIVE ENCLOSURE
- 70m depth rating
- Acrylic side caps
- Easy toolless opening
SPECIFICATIONS
SD-card :
- µSD-card with wear leveling
- 4GB capacity
ADCP :
- DC/DC for stable 32V power supply
- Full ensemble storage and transmittion
- Power down between measurement cycles
MPP :
- Mean or averaging of the measurements
- Power down between measurement cycles
Inductive communication :
- Up to 1000m wire length possible
- 1200 baud
Pressure sensor :
- 0-4 bar 0.1% absolute pressure sensor
Connectors :
- 2 x 2P male MCBH2M (battery pack)
- 1 x 6P female MCBH6F (MPP probe)
- 1 x 8P female MCBH8F (ADCP)
- 1 x 3P male MCBH3F (IMM)
Power supply :
- Input voltage 10-30 VDC
- 2 x SFB1 packs
Mechanical :
- 330.0mm x 225.0mm
- Weight : 5 Kg
Environmental :
- Operational temperature -20°C +45°C
- 70m permanent submersion